11
GB
CAUTION: Take care to avoid pointed projections and nails, etc. This will wipe out the sandpaper and
probably damage the sponge pad as well.
MAINTENANCE
As often as is necessary, blow compressed air through the motor while running at no load to clean out
accumulated dust.
KEEP TOOL CLEAN
Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft
damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the
material.
Wear safety glasses while using compressed air
.
Clean the vacuum swivel connector as too much dust will keep it from turning freely.
If the replacement of the power supply cord is necessary, this has to be done by the manufacturer or
their agent in order to avoid a safety hazard.
WARNING: All repairs must be entrusted to an authorized service center.
Incorrectly performed repairs
could lead to injury or death
