page5of16
page6of16
page7of16
page8of16
●
Remote control battery installation
There is a battery slot in the back of the remote control, open
the cell door, according to the direction of the battery to build
in two
AAA 1.5V batteries and then covered it.
●
Remote control battery replacement
*Battery life usually depends on the quality or using frequently
and the environment.
*If the remote control did not work, even close to the player,
please replace the battery.
●
Remote control operating range
* Remote control operating range is: not more than 7 meters
from the front panel to the player, angle within 60 degrees;
* Remote control distance will be affected by the ambient light
and the obstructions.
Connection method
●
Connect with AV (TV):
Through the AV cable connects the TV and the player, can
output composite video and audio signal. Plug the three plugs,
which are red, yellow and white, into the TV's AV input port.
The other side connects to the device's AV output port.
Change the TV to AV mode and press <CVBS> button on the
remote.
●
Connect with HDMI (TV):
Through the HDMI cable connects the TV and the player, can
output high-definition images and sound. Change the TV to
HDMI mode and press <HDMI> button on the remote.
After connecting with power supply and TV, the image will
be shown as below:
The main functions are File, Music, Movie, Photos and Setting.
Choose any icon with <OK> key.
Playing operation
1 Movie
Click Movie icon and press<Ok>to enter or press movie button
on remote. Videos can be chosen from USB or SD card:
USB Device includes external HDD, U disk or card reader.
Enter into USB Device or smart card, all files and videos can be
seen.
Choose one video and press <OK> to play.
If the device does not support the format of the elected videos,
the system will jump into the next file until the supported format
video is chosen.
When playing, press <OSD> button on remote and a control bar
will be shown as below:
ON/OFF subtitle, color, size, text encoding and so on can be
chosen.
2 Photo
Click Photo icon and press<Ok>to enter or press photo button
on remote. Photos can be chosen from USB or SD card:
Enter into USB Device or smart card, all files and photos can
be seen. Choose one photo and press <OK> to watch.
When playing, press <OSD> button on remote and a control bar
will be shown as below:
As shown above
:
You can view the current playback time
and the total time of the film source by operating the GOTO
button on the remote control during video playback, and you
can adjust the playback progress
Bedienungsanleitung24.de