Charging the player
1. Plug the headphone end of the USB cable into the player’s
earphone jack
2. Charge it via the enclosed Micro USB lead through PC or the
mains plug.
3. Charge for about 1.5 hour, or until the flashing Red light and
blue light changes from flashing to stay bright.
Troubleshooting
-Player does not turn on
1. Make sure battery is charged.
2. Connect to computer and check for response. (LED flashes RED if
computer recognizes player).
-No sound comes from headphones
1. Turn up volume (hold down Next Track button).
2. Gently clean out headphone jack.
3. Make sure the audio file format is supported.
4. Check if files play correctly on computer.
-Files do not transfer
1. Make sure the player is correctly connected to the computer
(LED should be flashing RED).
2. Make sure there is enough memory available to store the files
on the player.
-Light is on, but buttons do not respond
1. Turn off player (press and hold the Play/Pause button for 3
seconds).
2. Press and hold the Play/Pause button for 10 seconds to reset the
controls (LED will flash RED and BLUE at the same time and then
turn off).
Caution:
1. Don’t soak it continually in the water more than 1 hour per time.
2. To avoid corrosion and rust, please simply wash it in clean water
after swimming.
3. Please ensure the player is totally dry to connect PC or charging.
4. Using the cap to avoid dropping the waterproof earphone when
you are swimming.
