In the APP execute operation interface, click the status bar to enter the device information--click
the obstacle avoidance system--enter the obstacle avoidance system interface to view the
obstacle avoidance radar connection status, to detect the specific position and distance of the
obstacles.
5.7.2.
Identify obstacles
When the obstacle avoidance function is turned on during manual operation, AB operation, and
automatic plan, obstacles can be identified and hovered.
Obstacle recognition is used in the following two scenarios:
When the drone is far away from the obstacle, the drone will decelerate when it recognizes the
obstacle at a distance of 15m from the obstacle, and will stop at a distance of 5m from the
obstacle.
When the distance between the drone and the obstacle is less than 15m, the drone will
immediately take a braking deceleration action. The braking angle is related to the drone speed.
During the drone identification obstacle-deceleration-hovering process, the user can operate the
drone away from the obstacle, but cannot operate the drone near the obstacle.
5.7.3.
Bypass obstacles
When an obstacle is identified at point AB and automatic plan, the drone can automatically
bypass the obstacle.
The obstacle avoidance actions of the front and back obstacle avoidance radars and the front,
back, left, and right radars are shown below:
