Tips:
a.
Water pump calibration requires water in tank to ensure accurate calibration.
b.
The health value represents the normal indicators of the spraying pumps, nozzles,
filters, pipes, etc.
c.
Leakage in the pipeline, wear and tear, aging of the pump, clogging of the nozzle,
etc. will cause the health value to be too low.
d.
If the health value is <60, you should find the problem and repair it before you
operate, otherwise it will affect the operation effect.
e.
If the health value is less than 80, the parameter calibration cannot be performed
after the health value test, that is, the water pump calibration cannot be
performed.
Water pump calibration process: add a certain pesticides-pipeline exhaust-add more
than 5 liters of clear water-check the health value-automatically turn on the spray
and then test-the end of the test and the health value compound requirements
(above 80)-calibration Parameter-Calibration succeeded.
RTK Base Station
