AGRETO AgriCounter Drive
© AGRETO electronics GmbH
page:17
9
Maintenance and cleaning
The AgriCounter basically does not require ongoing maintenance.
If the display is dirty, clean it for reading.
If the battery symbol is lit, replace the batteries.
10
Troubleshooting
10.1
The battery symbol lights up
The batteries need to be replaced, follow these steps:
Remove the seal and the seal wire.
Remove the housing and remove the meter.
Remove the old batteries and dispose them properly.
Insert 2 new AAA batteries into the device in the specified direction.
Mount the counter again on the mounting plate.
Seal the device again with a new seal wire and a new seal.
10.2
Area is not counted correctly
Observe the specifications according to chapter „Positioning oft he meter“
Check the parameter
r100 – Revolutions per 100 m
Check the parameter
WidE – Working width
10.3
Distance or speed is not counted correctly
Observe the specifications according to chapter „Positioning oft he meter“
Check the parameter
r100 – Revolutions per 100 m
10.4
Revolutions are not counted correctly
Observe the specifications according to chapter „Positioning oft he meter“
