AGRETO AgriCounter Drive
© AGRETO electronics GmbH
page:18
10.5
Operating hours are not counted completely
The movements or vibrations on the machine are probably relatively low, so that
the necessary intensity for the count is not reached.
Set the parameter
SENS
down so that the counter triggers even with minor
movements.
To hold longer periods of rest during operation, set the parameter
hOLd
upwards.
10.6
Too many operating hours are counted
Perhaps the machine is exposed to light movements at standstill, which are
recorded as operating hours.
Set the parameter
SENS
upwards so that the counter only triggers for
larger movements
To prevent idle phases from being counted during operation, set the
hOLd
parameter down.
10.7
Damage to the device
Contact the manufacturer or your dealer
