AGRETO AgriCounter Drive
© AGRETO electronics GmbH
page:6
6
Configuration
6.1
Selection of the operating mode
The AGRETO AgriCounter Drive has 7 operating modes, in which various data
can be recorded.
First, decide which operating mode is suitable to your application, set the
required settings if necessary, and then mount the counter on your machine!
Operating mode 2A – Area (standard)
In this operating mode, the counter registers the number of revolutions around
its own axis. The area is calculated from the number of revolutions per 100 m
and the working width, the sum oft he area is displayed.
The counter is mounted on the rim of a wheel or on a part that rotates
depending on the path.
Operating mode 2B – Area and hours
In this mode, the area is counted as in 2A.
Additionally the operating hours are recorded. The counter reacts to vibrations
and movements of the machine independently of the rotation and shows the
total number of operating hours too.
Operating mode 2C – Distance
In this mode, the counter registers the number of revolutions around its own
axis. The distance is calculated from the number of revolutions per 100 m and
the total is displayed.
The counter is mounted on the rim of a wheel or on a part that rotates
depending on the path.
Operating mode 2D – Distance and hours
In this mode, the distance is counted as in 2C.
Additionally the operating hours are recorded. The counter reacts to vibrations
and movements of the machine independently of the rotation and shows the
total number of operating hours too.
