AGRETO LoadCounter II M
© AGRETO electronics GmbH
page:6
6.2
Operating Keys
The control buttons are located inside the device and accessible from the back
with the mounting plate removed.
To change settings, look at the buttons and
then turn the device with the display to the
front to read the display.
Button Definition
Function
M
Menu
Entry into the menu
Continue to the next parameter, exit from the menu
-
Minus
Back to the previous step
Decrease a parameter by 1
+
Plus
Continue to the next step
Increase a parameter by 1
6.3
Setting the operating mode
On delivery, the operating mode 5A is preset.
To change the operating mode, press and hold the "M" button for 3 seconds.
After releasing the key, the display briefly shows "MOdE" and then the current
setting of the operating mode appears.
Change to the desired operating mode with the "+" or "-" buttons.
The "M" key (or if you wait 10 seconds) will save the selection and exit the menu.
Please note: Changing the operating mode will reset all totals to 0.
