AGRETO Animal Scale
© AGRETO electronics GmbH
Seite:10
6.5
Mounting the doors
required mounting material
size
pieces
fillister head screw
M10x25
6
washer
M10
18-22
stop nut
M10
6
The door with the two holes for remote control and the castor is mounted at the front,
and the door without additional holes at the rear.
Mount the doors with the notch at the
door stop pointing downwards.
One disc each is to be installed between
the fixing bracket and the doors. Close
the doors to test them. If a door needs to
be positioned higher, an extra disc can
be placed between them.
Tighten the stop nuts only enough to
ensure that the doors can still be moved
easily.
Mount the two door latches as shown.
One disc is to be mounted between the
stop and the latch. At the rear door,
tighten the stop nuts only enough to
ensure that the door latches can still be
moved easily.
The front door is usually remote controlled, and kept closed due to the construction of
the remote control. The bolt can here also be fixed in the open position.
