Brush Cutter 4500 Hydro
33
5
+
-
6
6
6
6
6
A
Adjustments on Hand Levers
Check clutch play or adjustments each time
you operate the machine. If necessary, read-
just (especially after commissioning the ma-
chine, during break-in period, and after ex-
changing the bowden cables).
Handhebelspiel: X = 1-2 mm
! = The Bowden cable must be placed in the hand lever
support on bottom position!
Adjustment:
1. Remove retaining spring (2).
2. Remove cable end (3) and adjusting pin (4)
out of bracket in hand lever.
Screw the adjusting pin (4) in or out to a
play of X or idle is present in position 0.
1. Place cable end and adjusting pin back
into bracket
.
2. Fit retaining spring (2).
Park Brake
Every time you start operation, check the park
brake on proper function = with the steering bra-
ke levers on both sides pulled in and locked
l
The park brake must hold the machine on
slopes of 25° if the pa wl (Y) on either side is
engaged.
Adjustment: on hand levers
-
to be
undertaken alternately the setting of the wheel
coupling.
è
-
Service
ç
Wheel Coupling
Each wheel must be uncoupled when the lok-
king lever is set inwards (Z).
Adjustment: to be made with the adjusting
screws
.
5. Maintenance
Z
Y
6
6
6
6
6
A
