20
agria
Tool Carrier 5500 Grizzly
3. Devices and Operating Elements
The tool carrier agria 5500 Grizzly is a
base power machine and is always op-
erated with an implement mounted.
Therefore, the machine is suited for all
common applications in farming and for-
estry, as well as for winter service.
The following attachments are available:
l
Mowing attachments
l
Sweeping attachments
l
Snow dozers and snow casters
l
Gravel and salt spreaders
Engine
The four-stroke petrol engine runs on
commercial petrol (refer to “Fuel Rec-
ommendations”, p6).
Ignition System
The engine is equipped with a mainte-
nance-free, contactless electronic igni-
tion system. We recommend to have
necessary check-ups done by an expert
only.
During the first 20 operating hours
(break-in period) do not use engine to
maximum power.
Even after break-in period never use
engine at higher speed than necessary
for the work in hand.
I
High engine speed is harmful
to any engine and consider-
ably affects its durability. This applies
especially for no load operation. Any
overspeed (have the engine roar) can
result in immediate damage.
Cooling System
Cooling system is fan-cooled. Therefore
keep screen at recoil starter and cool-
ing ribs of cylinder clean and free from
sucked-in plant trash.
Idling-speed
Always ensure that idling-speed is ad-
justed correcty. At low speeds and with
the speed control lever set to idle, the
engine is supposed to run smoothly and
without run-out.
Air Filter
The air filter purifies the air intake. A
clogged filter reduces engine output.
3
