agria
Tool Carrier 5500 Grizzly
27
3. Devices and Operating Elements
3
Steering Handle
W
Do never adjust operating handles
during working - risk of accidents!
Steering Handle Height Adjustment
l
Unfix ball handle levers
on either side until
the ratchets
are free.
l
Bring left and right steering handle to the de-
sired height and introduce into the respective
ratchet.
l
Tighten ball handle levers
again.
Steering Handle Lateral Adjustment
From its normal position (centre position), the steer-
ing handle can be turned by about 30° to the left or
right.
l
l
l
l
l
Pull ball handle (B/1) upwards and keep it in
position; then turn steering handle to the left or right
into the desired positon.
l
l
l
l
l
Release ball handle and slightly move steering
handle to the left and right until the fixing bolt is
engaged.
Eyelet for Loading
The hooked yoke (A/6) is meant for loading the
machine and for suspending the retaining rope for
works on slopes.
Do not use any loading devices with sharp edges
(e.g. sharp-edged hooks, lugs etc.).
Never walk or remain under moving loads. Dan-
ger!
Fixing Points
For towing away, recovering and tying down and to
ensure a safe transport, use the
fixing
p
oints
at the connection flange and engine food guard.
B/1
A/6
