38
agria
Tool Carrier 5500 Grizzly
5. Maintenance
6
6
6
6
6
A; 8 h
6
6
6
6
6
25 h (50 h)
I
Apart from observing all operating instructions , it is also important to pay
attention to the following maintenance instructions.
Please note:
Only do all maintenance work with the engine switched off and
spark plug connector disconnected!
When working on mowing knives, wear safety gloves!
Engine
Check Oil Level
each time you take up operation and
after every 8 operating hours,
l
only with engine switched off and in
horizontal position.
l
Clean oil plug and surrounding parts.
l
Remove oil plug, clean dipstick with
a clean cloth and dip back into oil tank
(do not screw in), take out dipstick and
read oil level.
l
In case oil level is below lower mark
"min", refill engine oil (refer to “Specifi-
cations”) until oil level reaches rim of
oil filler neck "max".
Changing Engine Oil
The first oil change is after 25 oper-
ating hours, Following oil changes are
after every 50 operating hours. Change
oil while engine is still warm, but not hot
– danger of burns!
l
Clean filling- and drain plug and sur-
rounding parts.
l
Change the oil and dispose of prop-
erly.
I
Check sealing washer for
good condition and exchange,
if necessary!
- For engine oil quality refer to “Specifi-
cations”.
5
5
Petrol engine
