4 Commissioning and Operation
Remote-controlled High Grass Rotary Mulcher
agria 9600-80
35
Working with the machine
Move the machine to the working area and
stop with the mowing deck over a clear space.
Steering and travel speed are controlled with the
joystick (B/1).
Move the joystick slowly:
- up = forward
- down = reverse
- to the left = left, - to the right = right.
The machine's speed depends on the posi-
tion of the joystick.
Use the joystick on the remote control care-
fully and avoid sudden changes of direction.
Move the machine slowly, so that you can
become familiar with the machine and check that
the commands are executed correctly.
Set the required cutting height with the mow-
ing deck up / down switch (B/7). The cutting
height is shown on the display (B/2). It can be
changed during operation and also when the
engine is off.
Select the travel speed range with the travel
speed selector switch (B/3). Choose position 1
or 2 for mulching, depending on the vegetation.
Only use position 3 to move the machine without
mulching.
Increase the engine speed to
full throttle
with the rpm switch (B/4) (press + rpm).
Switch on the mowing drive with the 'mowing
drive' switch (B/8) and move to the area to be
worked on.
Summary of Contents for 9600-80
