background image

2 Technical Data 

 

 

Remote-controlled High Grass Rotary Mulcher 

agria 9600-80

 

17 

Petrol engine 

Engine:

 ........................................................................................................ Kawasaki  

Designation:

 ................................................................................................. FS600V 

Type:

 .......................................... Air-cooled, 2-cylinder, 4-stroke, OHV petrol engine 

 with carburettor vented from the inside and magnet. Shut-off valve 

Bore x stroke:

 ......................................................................................... 73 x 72 mm 

Cubic capacity:

 ........................................................................................... 603  ccm 

Power:

 ................................................................ 12.7 kW (17.3 DIN HP) at 3600 rpm 

Torque:

 ..................................................................................... 40.4 Nm at 2200 rpm 

Spark plug:

 ......................................................................................... NGK BPR4ES 

Electrode gap: 0.75 mm 

Ignition:

 ...................................................................................................... electronic, 

radio-interference-suppressed in accordance with VDE 0879 

Valve clearance:

 (with cold engine) ........................... Inlet and outlet 0.10 - 0.15 mm 

Starting device:

 .......................................................................... Electric starter 12 V 

Generator:

 .......................................................................................................... 16 A 

Battery:

 ................................................................................................... 12 V  14 Ah 

Fuel:

 ..................................................................... Standard petrol for motor vehicles, 

octane number see engine operating instructions 

Fuel consumption:

 ................................................................................... 322 g/kWh 

Fuel can capacity:

 ............................................................................................ 10.0 l 

Air filter:

 ............................................................................... Double element air filter 

 

with cartridge and foam pre-filter 

Operating speed:

 ......................................................................................  3500 rpm 

Idle speed:

 .................................................................................................. 2750 rpm 

Lubrication:

 ..........................................................Forced-feed circulation lubrication 

Engine oil:

 ........................................................................................... Multigrade oil, 

 ............................................................filling quantity: 1.5 litre without oil filter change 

 

1.7 litre with oil filter change 

at ambient temperature -15 to +45 °C: SAE 10W-40, API classification SJ or higher 

Slope capability:

 

The engine is suitable for use on slopes (with "max." engine oil level = upper filling 
mark): ......................................Continuous operation up to inclination of 50° (119 %). 

  

Summary of Contents for 9600-80













































































Reviews: