19/09/18
Page 33 of 67
ASR650 Operational Manual
4.4.1
Received Tag
This section is used for displaying the IDs which have been sent by the reader. Each time a tag
number is received, the background color of the text fields turns into green for a short time.
4-digit Country Code as defined per ISO
11784/11785
12-digit National Identification Code as
defined per ISO 11784/11785
Transponder Type, if supported by the
selected output format (FDX-B or HDX)
Indication of whether the read transponder is
an animal tag or not, if supported by the
selected output format (can be TRUE or
FALSE)
In this case the output format was
‘
Byte Structure
’. This format does not only provide the
information if the tag is an animal tag or not, but also the other
‘
Advanced ISO information
’ like
‘
User Information
’ (also called ‘Species Code’), ‘
Reserved Zone
’, ‘
Retagging Counter
’ or the ‘
Data
Block Flag
’. The antenna number is only shown when using an antenna multiplexer and only if
the selected output format contains this information.
The screenshot below shows this section with different results. The ‘
Advanced ISO information
’
have different values and this time a multiplexer was used and the tag was read on antenna ‘3’.
4.4.2
Settings
These buttons are available within all tabs of the main window.
‘
Read all
’ requests all reader
settings in one step, independently of the tab which is currently active.
‘
Apply all
’ is similar but will
send all settings to the ASR650.
‘
Reset all
’ will set the reader back to factory default values.
Please note that there is no additional
‘Save’ command necessary for
storing the configuration in the reader’s non-volatile memory like it had to
be done for the previous Agrident Stationary Readers. The only exceptions
are the setting for RF on / RF off and particular multiplexer settings.