10
The user is responsible for ensuring compliance with the
applicable regulations and for monitoring developments.
Regularly check the condition and fixing of the coupling pins;
do not hesitate to change them if they are worn.
The tractor's ball joints may also show signs of wear, so do
not hesitate to replace them with new ones.
Drive at a reasonable speed in accordance with the law so
that you always have control of the coupled unit.
Take particular care on uneven or sloping ground. Before
starting a descent, drop down to a lower gear.
The tractor used to move the machine on the road must have
the same weight and power as the one used for field work.
Never manoeuvre when a person is near the machine or the
tractor.
For machines equipped with a folding system for transport,
make sure that there are no people or obstacles in the
scanning area when folding the parts.
Observe all safety rules when driving, especially on bends
and narrow roads.
Take all precautions before getting out of the tractor.
Engage the parking brake, stop the engine, remove the
ignition key.
When travelling on the road, do not allow anyone to ride on
the machine or between the machine and the tractor.
2.10 2.10 Fertilisers and seeds
treated with disinfectants
Improper handling of fertilisers and seeds treated with
disinfectants can lead to poisoning and death.
Observe the product manufacturer's safety data sheet. If
necessary, ask the dealer for the safety data sheet.
Determine the required personal protective equipment
according to the manufacturer's instructions and ensure its
availability.
2.11 Environmental protection
Consumables such as hydraulic oil, lubricants, etc., can
harm the environment and people's health.
Do not allow consumables to pollute the environment.
Soak up spilled consumables with absorbent material
or sand, collect them in a sealed, marked container and
dispose of them in accordance with legal requirements.
2.12 Retrofits
Constructional changes and additions can impair the proper
functioning and operational safety of the machine. This can
result in serious injury or death.
Do not make any constructional changes or additions that
are not authorised by AGRISEM.
Conversions or additions to the machine may only be carried
out by a specialised workshop or by an operator trained for
this purpose by AGRISEM.
Observe national regulations for weights, weight distribution
and dimensions.
For equipment affecting weight or weight distribution, the
specifications for the coupling device, load transfer and axle
load must be checked and observed.
For machines without brakes, a braking system may have to
be retrofitted if the weight limits are exceeded.
For all changes to the data on the nameplate, a new
nameplate with the current data must be installed.
If there are any changes to the information on the road
permit, it must be renewed.
Summary of Contents for Big Boss
Page 73: ...73 12 5 1 3 Icons ...
