5
2.1 Intended use
The machine is intended to be used for seeding and/or
normal tillage in accordance with the specific rules in the
agricultural sector. Any other use or use beyond the intended
purpose, e.g. as a means of transport, is not considered to
be in accordance with the intended use and may result in
injury or death to people.
AGRISEM accepts no responsibility for any claims that may
result from this. The user assumes full responsibility for this.
Comply with the accident prevention regulations of the
mutual agricultural insurance funds and other generally
recognised rules on safety, occupational health and road
safety.
Only use the machine if it is in perfect technical condition
for its intended purpose and with full knowledge of the risks!
Remove any potential safety hazards immediately.
The machine may only be used, maintained and repaired
by persons who are familiar with it and have been informed
of the dangers.
2.2 Spare parts
AGRISEM original spare parts and accessories are specially
designed for this machine.
Other spare parts or accessories are neither inspected nor
authorised by AGRISEM.
The installation or use of parts that are not of the AGRISEM
brand may, in certain cases, lead to adverse changes in the
characteristics of the machine and thus affect the safety of
people and the machine.
The AGRISEM Company cannot be held liable for damage
from the use of non-original parts and accessories.
When safety stickers are affixed to the component that is to
be replaced, they must also be ordered and affixed to the
replacement component.
2.3 User manual
Intended use also includes complying with the instructions
in the user manual and the manufacturer's operating,
maintenance and servicing instructions.
The user manual is an integral part of the machine!
The machine should only be used in accordance with the
user manual. Failure to comply with the user manual may
result in serious injury or death to persons.
Before working, read and observe the relevant chapters of
the user manual.
Keep the user manual handy.
Give the user manual to subsequent users. To be submitted
in the local language in case of resale in a country where
another language is spoken.
2.4 Personnel qualification
Improper use of the machine may result in serious injury or
death to persons. To avoid accidents, any person working
on the machine must meet at least the following general
criteria:
They must be physically able to control the machine.
They are capable of carrying out safe work on the machine
within the scope of this user manual.
They know how to operate the machine in the course of
their work and are aware of the hazards involved in the
work. They can assess and avoid work-related hazards.
They have understood the user manual and can apply the
information it contains.
They know how to drive vehicles safely.
For driving on the road, they are familiar with the respective
rules of the road and have a valid driving licence.
A trainee should always be supervised when working with
the machine.
The operator must:
- Regulate the scope of responsibilities, competence
and supervision of personnel.
Summary of Contents for Big Boss
Page 73: ...73 12 5 1 3 Icons ...
