26
Never stand under the sun wheel when it is in its transport position.
When testing the distribution flow, the user must turn the sun wheel with care to avoid any injury.
When the wheel is rotating, no-one must be within 50 metres of the machine. This means that no-one
must put their fingers into the distribution grooves unless the transmission system is completely
stopped.
When changing the transmission gear ratios, ensure that the gearing and chain are handled with the
greatest care to avoid any injury. No-one must be within 50 metres of the machine. Avoid putting
yourself in danger when changing the gearing by avoiding climbing on the machine's beams or disks,
as this could be dangerous.
Ensure that the sun wheel is protected during transport to avoid it hitting anything or injuring anyone.
Similarly, when the turbine is started up, a safety area must be enforced around the machine due to
the risk of objects or liquids being ejected (e.g. soil, oil, stones, metal, etc.).
When travelling on the public highway, always be very careful and alert. As the rear visibility is
reduced during transport, ensure that the way is clear before reversing the machine (50-metre safety
area).
The user must comply with the highway regulations applicable in his country with regard to the front
hopper.
If the tractor’s signalling equipment is not sufficient (or not sufficiently visible) ensure that you fit your
front hopper with lighting and signalling plates.
When working, a 50-metre safety area must be enforced due to the risk of
objects being ejected.
