10
Fitting Transport Box to Frame
If you have purchased the transport box option at a later date, Please refer to Fig. 2 of the
previous page.
The frame brace requires removal prior to fitting the transport box option (Fig 2). Please
follow instructions in Fig 1 to attach/detach the transport box. Always re-fit the frame brace if
you are using the swath roller without the transport box attached. (Fig2).
Remove the transport box lid (if relevant as it may already be removed). A lifting point is
situated in the base of the transport box. A lifting eye is provided with the transport box that is
fixed in position by screwing into the centre hole of the lifting point in the box floor. This will
allow for the lifting of the transport box onto the frame using a lifting strap and forklift. A
second person will be required to assist positioning the box into place. Using the new Nylocks
nuts provided with the transport box, fix the box in position (Fig 1) and ensure all fixings are
fully tightened and that you are satisfied the box is secure to the frame. Re-fit the transport
box lid before use.
Transport Box Swath Roller Parts List
No
Description
Part No
No Per Box
1
Main Transport
Box
-
1
2
Transport box Lid 2020 SR_BFR_0410
2
3
Logo
-
1
4
Grease Gun
Holder
NSGG_0601
1
5
M12 x 40 Bolt
AW_M12x40_B
4
6
M12 washer
AW_M12_W
24
7
M12 Nylock
AW_M12_NL
12
8
M12 x 60 Bolt
AW_M12x60_B
2
9
M16 x 45mm Bolt
AW_M16x45_B
2
10
M16 Washer
AW_M16_W
4
11
M16 Nylock Nut
AW_M16_NL
2