background image

MOVING AND PASSENGER LOCATION 

• While loading the machine into the transport vehicles, you should pack it again

st impacts and 

pay attention to the outer parts of the mechanical steel. 

For example: hydraulic hoses. 

 

• Passenger position: If you drive a distance behind the tractor with the machine, the pistons 

must be pushed off the tractor with oil. If not, the machine parts can open and pose a danger on 
the road. 

 

SAFE OPERATION OF THE MACHINE 

Before using the machine, the connections of the bolt, pin, hydraulic cylinder and hose should be 
checked. Wear parts must be replaced after a certain time. 

 

 

 

 

 

      WARNING! 

Do not use the rear loader in public places.                                                                                                                     
Particularly stimulating materials should be hung up during use 

 

 

 

      WARNING! 

Make sure there is no one in the work area that can be damaged.                                                                                   
Make sure that children and animals in particular are not in the work area. 

 

 

 

 

Summary of Contents for AtomS









Reviews:

Related manuals for AtomS