AG-tronik M1 AND REGULATOR PR-9
INSTRUCTIONS FOR USE – rev. 2017-04
32
When using the same nozzle height, and if the left side is symmetrical to right side by number
of nozzles, then entered data do not have such importance, as the right hectare dosage is
taken care by flowmeter in other situations it is necessary to enter the correct information.
Setting nozzle segment:
For opening menu »NOZZLE SETTINGS« select ikon
and confirm with button
.
The screen displays basic menu
:
Figure 47
On the top are L-1, D-1 and 2/4.
L-1, D-1- L stands for left spryer segment with 7 nozzles, letter D stands for the right
segment. To change the number of nozzles, move cursor with button
or
to segment, and with buttons
and
set individual values and confirm with
button
. You can set in range 0-7.
2/4 and bottom value 2 stands for sprayer with two mounted segments, for each side
one of them.
In case there is a sprayer with two segments on each side (top – bottom or one beside other),
move cursor with buttons
or
to ikon
2/4 and with buttons
and
set
individual values and confirm with button
.
