AG-tronik M1 AND REGULATOR PR-9
INSTRUCTIONS FOR USE – rev. 2017-04
47
Figure 73
If you have chosen not to cancel the analysis, simply choose NO and return to the previous
window.
If you select " " and confirm with confirmation button
, new window is displayed:
Figure 74
Figure 75
In window, AG-tronik asks if you wish to write analysis to SD memory card. If you select "X",
the analysis is not saved and analysis data is lost.
If selecting " ", spraying data is written on SD memory card. During writing, WRITE OK is
shown briefly on the display under the line.
If you do not have a SD memory card in AG-tronik, DRIVE ERROR displays briefly under
bottom line. Insert memory card and repeat writing procedure.
If analysis is deactivated, and you have accidentally wanted to turn off analysis, ANALYSIS
NOT STARTED is displayed briefly.
If you have finished work and want to turn off AG-tronik, but analysis is still on, AG-tronik
warns you that analysis is in progress and that work cannot be turned off, until you complete
analysis. When you press button
, ANALYSIS IN PROGRESS is shown briefly on the
display. In this case, analysis must be stopped. Select basic image "WORK", select line
PAUSE/END and press confirmation button
to end analysis.