AG-tronik M1 AND REGULATOR PR-9
INSTRUCTIONS FOR USE – rev. 2017-04
28
New value is displayed. If you want to change value of marks N, press button
and
selection frame selects field of mark N. Press button
and value starts flashing. Use
buttons
and
to set new value and confirm it with button
. New value is
displayed. If you have finished with entries, press buttons
to return to menu
"SPEED CONSTANT".
Distance:
Distance can also be input by measuring the distance beforehand. Drive the distance with
tractor and input it in AG-tronik.
To do this, follow this procedure:
Move the tractor to the start of the measured distance. Stop the tractor and choose line
DISTANCE in menu SPEED CONSTANT. Press key
to open the window:
Figure 38 Figure 39
Display shows current value of imp/km (in our case 3294), impulses (0) and actual travelled
distance (0 km). Press button
and value 1000 starts flashing. Start driving and impulse
counting begins next to word IMPULSES. When the distance is travelled, stop and number of
impulses, performed on the path, is displayed next to line IMPULSES. In our case, the value