background image

INSTRUCTIONS FOR USE 

AGP 300 – 600 PRO 

Rev.02/2019

 

 

16 

 

The sprayer must be equipped with road safety equipment. 

 

Agromehanika, d.d. provides the sprayer  with  equipment,  complying  with  the Regulation  
EU no. 167/2013, and type approval. 

2.17

 

Procedures in  accidents with chemicals 

If your skin or eyes come in contact with chemicals or their solution, wash them out with plenty 
of water and repeat the process several times. 
In the case of suspected poisoning (symptoms: sweating, dizziness, depression, headache, 
sickness): 

 

immediately stop working; 

 

take off wet clothes; 

 

remain calm; 

 

if you feel sick because of consumption of chemicals try to throw up; 

 

lay on your side; 

 

immediately call for medical help and let the physician see the label of the chemical, so 
he or she will be able to determine the type of poisoning easier. 

In case of suspected poisoning the patient must not eat or drink castor oil, milk, butter, eggs and 
alcohol, since these ingredients worsen the poisoning effect.¸ 
 

2.18

 

Regulations regarding machine use 

Machine operator and user must be familiar with regulations regarding plant protection. 

Summary of Contents for AGP 300 PRO







































































Reviews: