INSTRUCTIONS FOR USE
AGP 300 – 600 PRO
Rev.02/2019
29
7.6
Suction filter
The suction filter is mounted between the reservoir and the pump. Its function is filtering the
insecticide before it reaches the regulator. The size of the filter is 50 MESH.
7.6.1
Cleaning filter insert
Firstly, unscrew the yellow lever (3) on the filter cover (2) by turning it counter clockwise and
pulling it out. The valve mounted inside the filter will close the flow of the liquid from the main
reservoir. Unscrew the nut (5) from the filter cover and remove the cover and the filter insert (4).
Clean the filter insert and mount all parts back together in the reverse order.
When mounting the parts back together, make sure that the metal pin of the locking valve, which
is located at the extracted part (with a yellow lever) will be properly inserted, otherwise the filter
will not function properly.
Figure 7.3
7.7
Nozzle for cleaning interior of main reservoir
Figure 7.4
Nozzle is mounted in the interior of main
reservoir and is intended for washing of
reservoir's interior after finished spraying. It
is connected to one of the supply valves on
pressure regulator, which, when open,
provides required water for cleaning.
WARNING: Use protective gloves when cleaning the filter!
Clean the filter insert before each filling of the reservoir!
