sales@agrotkindustrial.com
https://www.agrotkindustrial.com/
P16
OPERATION INSTRUCTIONS
2. ALU-2 balance mode (stick on the rim)( ALU-1
,
ALU-3 are the same operation, only
the sticky positin is different)
1) Pls. refer to the above mentioned way of measuring a
、
b
、
d, three
values.
2) According to shape of rim, press
key to light on ALU2.
3) Pls. put down the hood or press
key to rotate the tire.
4)
After the wheel stops, the digital tube displays the unbalanced weight
,
press
key to check the actual
unbalanced weight.
5) turn the tires slowly Anti-clockwise with the hand, until the lateral imbalance indicator lights are all on,
at the point at 12 o 'clock(12H is off) or 9 o 'clock (9H is on) are the position for unbalance point of
alignment planes. Balance alignment planes are as shown in below pictures. Paste corresponding
balance weight on theoutside of the wheel rim. See pic.6.
Pic.6
6) turns slowly the tires counterclockwise, until the inner side of the indicator lights are all on, at the point
at 12 o 'clock(12H is off) or 9 o 'clock (9H is on) are the unbalance point of alignment planes. Balance
alignment planes are as shown in below pictures. Paste corresponding balance weight on the inside of
the wheel rim. See pic.7.