sales@agrotkindustrial.com
https://www.agrotkindustrial.com/
P19
OPERATION INSTRUCTIONS
3.3 Rotate slowly the tire anticlockwise by hand until the inner side of indicator lights are all on
,
at
the point of 12 O’clock is the unbalance point of alignment plane. Balance alignment planes are as
shown in below pictures. Paste corresponding balance weight on the inside of the wheel rim. See
pic.11
Pic.11
3.4 After placing the balanced lead, press
key to rotate the main shaft. If the operation is
correct,we will see pic. 12. It indicates that the balancing was successful.
Pic.12
4. Set the option SLC to
ON ((With automatic gauge function, you can use the gauge head to
find position to stick the block)
Pic.13