SIX. Trouble description
★
When the machine shows the following faults, you should perform self-fault diagnosis and replace the damaged parts in
time to ensure safe use!
No.
Screen displayed
Reasons
Solutions
1
1. No rotation
2. With rotation
1. Check or replace the power panel
2. Check or replace the position
sensor or computer panel
3. Adjust holder of photoelectric panel
2
1. Tire is no fastened
2. Position sensor
1. Fasten the tire
2. Check or replace position sensor
3
1.Tire is with no pressure.
2.Tire distortion is out of range
1
.
Mounting the tire and inflate it.
2
.
Check the tire.
4
1.Position sensor is something wrong.
2.Computer panel is something wrong.
1. Check or replace position sensor
2. Check or replace computer panel.
5
1.
Travel switch is something wrong.
2.
Computer panel is something wrong.
1.Check or replace travel switch.
2.Check or replace computer panel.
6
1. Power panel is something wrong.
2
.
Computer panel is something wrong.
1.
Check or replace power panel.
2.
Check or replace computer panel.
7
1. Customer data lost.
2. Computer panel is something wrong.
1.
Self-calibration again.
2.
Check or replace computer panel.
8
1. 100g lead not added after
self-calibration.
2. Computer panel is something wrong.
3. Power panel is something wrong.
1.
Self-calibration again.
2.
Check or replace computer panel.
3.
Check or replace power panel.
sales@agrotkindustrial.com
https://www.agrotkindustrial.com/
P25
OPERATION INSTRUCTIONS