background image

Ae-man-429-0.0 v1.1 

 

 

 

 

 

 

 

 

USER  MANUAL 

 

www.aguilera.es 

TECHNICAL CHARACTERISTICS 

 

 

AE09/GM 

AE09/GM-12 

AE09/GM-24 

Supply voltage:

 

230V AC

 

12V DC

 

24V DC

 

Heating cycle consumption:

 

13 mA

 

31 mA

 

110 mA

 

Standby consumption:

 

12 mA

 

13 mA

 

70 mA

 

Alarm consumption:

 

14 mA

 

56 mA

 

122 mA

 

Classification: 

Type-A device 

Relay contacts:

 

C, NC and NA voltage-free.

 

Relay contact maximum current:

 

8A 250VAC/30VDC

 

Operation indicator 

Green, fixed activation 

Heating cycle indicator 

Activation of Failure (orange)  and Alarm (red)  

indicators alternatively 

Failure state indicator 

Orange, fixed activation 

Pre-alarm state indicator 

Red and acoustic indication, intermittent activation 

Alarm state indicator.  

Red and acoustic indication, fixed activation 

Acoustic alarm:

 

piezoelectric buzzer, 3300Hz, 85 dB

 

Alarm level:

 

10% L.I.E. METHANE gas(CH

4

)

 

Alarm confirmation:

 

10 seconds

 

Relay activation delay:

 

8 seconds

 

Initial heating period: 

120 seconds 

Temperature range:

 

0º  -  +50º C  (room temperature).

 

Humidity range:

 

Relative humidity 10% - 90% with no condensation

 

Casing material 

White ABS

 

Dimensions:

 

130 x 70 x 52 mm

 

Weight 

300 gr 

133 gr 

137 gr 

 

 

 

 

 
 
 
 

 
 
 
 

 

Please, keep these instructions in a safe place.  

.

 

 

 

For environment preservation, the electric or electronic unit is not to be treated as 
domestic waste at the end of its lifetime. Please, make selective collection taking it to 
specific collecting points for the recycling of electric and electronic units in your 
town/city. 

Summary of Contents for AE09/GM-12









Reviews: