10. Programming With Programming-Menus
4. Switch on the sleep mode using the key:
<ON>
Sleep:
Ø
5. Start the measurement in a meas. menu with key:
<START>
The device announces in the display,
Sleep On
then it switches off, for control purposes only a
LED ´
SLEEP
´ (4) flashes
red lamp flashes regularly on the upper window
frame.
6. Within the set cycle the device switches
automatically on, performs a measuring point
scan, and then switches off again.
7. Terminate sleep mode using the key:
<ON>
8. Terminate measurement using the key:
<STOP>
The start or stop through start and end time or through limit va-
lues is, on principle, not possible in sleep mode and, therefore,
must be switched off!
10.2.5 Memory Output
The content of the data memory can, com-
pletely or in parts, be output to the serial in-
terface. For each output one of the three
available output formats ´List´, ´Columns´ or
´Table´ can be used. The option to specify
partial ranges is available as it is possible to
set the start and end time of measurements
and also possible to select the number of
corresponding identified measurements.
Menu
Memory Output
:
Setting the
output format
:
Output form: List
In case of
selecting a numbered measurement:
NUMBER: 12-001 A
In Function
Number
select number with keys:
<FIRST>
,
<NEXT>
...,
<LAST>
To
select a time interval:
Enter the start time using the format ´
hh:mm:ss
´:
Start time:
07:00:00
Enter the end time using the format ´
hh:mm:ss
´:
End time:
17:00:00
Enter the start date using the format ´
dd:mm:yy
´:
Start date:
01.05.00
Enter the end date using the format ´
dd:mm:yy
´:
End date:
01.05.00
Perform complete output of data memory:
<ALL>
Output of a numbered measurement:
<NR>
Output of a time interval from start to end:
<TIME>
Cancelling the memory output using the key:
<STOP>
50 ALMEMO 2690-8
* OUTPUT FROM MEMORY *
±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±
Memory Internal:
512.0 kB
Memory free:
125.8 kB
Residual output:
12.5 kB
Output form:
Columns
Number:
01-001 A
Time: 12:34:56 Date: 01.01.04
Time interval:
Start time:
07:00:00
Start date:
01.01.04
End time:
17:00:00
End date:
01.01.04
ALL NR F TIME ESC
![Lambrecht Ser[LOG] Operator'S Manual preview](http://thumbs.mh-extra.com/thumbs/lambrecht/ser-log/ser-log_operators-manual_3390951-001.webp)
