10. Measuring using Measuring-Menus
10.1 Measuring with one Measuring Point
Standard display
The menu
Standard display
shows a measur-
ing point in the largest display with measuring
point, comment and dimension. Some symbols
serve for the control of the status of measured
values (s. 9.3). The functions maximum and
minimum value are described in 10.1.2, cycle
timer in 10.3.2 and memory free in 10.3.3.
10.1.1 Selecting the Measuring Point
The key
allows for successively selecting all active meas. points including
the display of the current meas. value(
M
in the middle of the softkey line). If
the key
is pressed, the previous channel is again indicated. By selecting
the meas. channel the input channel is, at the same time, also selected.
Increasing the meas. channel using the key:
Decreasing the meas. channel using the key:
● Alternatively, the meas. points can be selected using the thumb-wheel (7).
10.1.2 Peak Value Memory with
Time and Date
The highest and lowest value, including the
time and date, will each time be determined
and stored from the acquired measured values
of each measuring point. The functions listed
below are available to display these values,
function channels are available put them out
(s. 11.3.10).
The software AMR-Control can be used to
easily load or configure the menu
Monitoring
with Max/Min times (illustrated on the right) as
a user menu (s. 10.7).
Function Maximum Value:
Maximum Value: 245.7 °C
Function Minimum Value:
Minimum Value: 224.1 °C
Function Time and Date of Maximum Value:
Max Time:
12:34 01.02.
Function Time and Date of Minimum Value:
Min Time:
12:56 01.02.
To clear, select function (s. 9.4):
Maximum Value:
245.7
°C
24 ALMEMO
®
2890-9
C © REC COM l© ©l R01 * ´´´´´´µµµµ¶
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
01:
Velocity
m/s
æ
» H
º
28.67
Maximum value:
31.34 mls
Minimum value:
25.37 mls
Cycle-timer:
00:02:30 Un
Memory free:
512.0 kB
START MANU M PRINT ESC
C © REC COM l© ©l R01 * ´´´´´´µµµµ¶
±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±
Time: 12:34:56 Date: 01.01.04
Cycle-timer:
00:00:30 Sn
01: 244.5 °C
NiCr Temperatur » H º
7 Limit max:
250.0 °C
Maximum value:
245.7 °C
Maximum time:
12:34 01.02.
7 Limit min:
230.0 °C
Minimum value:
224.1 °C
Minimum time:
12:56 01.02.
START MANU M PRINT ESC
