- 6 –
2
How to use Almemo
®
Control when the
Transparent Mode is activated
2.1
How to use Almemo
®
Control via WLAN or Ethernet
1.
Connect the data logger via Ethernet or WiFi to a PC (see Instruction
Manual chapter 7.4.1 Connect PC to the data logger).
2.
Open the ALMEMO
®
Control program.
3.
Click on
Interface.
4.
Click on the tab
IP Network
5.
Enter the IP address in the field next to
IP address or host
.
The IP address is displayed in the status display.
6.
In the field next to
Port
enter 10001.
7.
Click on
Ok.
8.
Click on
Search for connected devices.
➢
Every measuring circuit board will be listed individually in the device list.
2.2
How to use Almemo
®
Control via USB
1.
Connect the data logger via USB to a PC (see Instruction Manual chapter
7.4.1 Connect PC to the data logger).
2.
Open the ALMEMO
®
Control program.
3.
Click on
Interface.
4.
Click on the tab
Serial Interface.
5.
Click on
Auto-detect the baud rate.
6.
In the drop-down menu
Interface
select the COM-Port.
7.
Click on
Ok.
