9.1 9.2
9.1
8.3/8.4
9.1 7,1 5.4
2.1/2.2/2.5/2.6/3.1/8.1/8.2 4.1 4.2
3.2
5.1/5.2/5.3
4.1
4.2
2.3/2.4/2.5/2.6/3.1
1.1/1.2/1.3
Item Designation
Specification
Viscosity
Filling amount
1 Motor oil
MIL-L-2104 C = API-CD
acc. to manufacturer
ca. 10 l with oil lfilter
2.2 Transmission oil
MIL-L-2105 D = API-GL5-6-LS
SAE 85 W 90-LS
ca. 7.7 l
with LS additive
2.4 Transmission oil
MIL-L-2105 D = API-GL5-6-LS
SAE 85 W 90
ca. 8.0 l (20 km/h)
with LS additive
ca. 9.5 l (30 km/h)
2.6 Transmission oil
MIL-L-2105 D = API-GL5-6
SAE 85 W 90
ca. 2 x 0.7 l each
5.2 Hydraulic oil
DIN 51524 - HVLP 46
ISO VG 46, VI > 180
ca. 100 l
6 Grease
DIN 51825 - KPF 1/2 N-20
as required
7 Distilled water
as required
8 Mineral oil
DIN 51524 - HVLP 46
ISO VG 46, VI > 180
as required
Maintenance points
1
Engine
1.1 Maintenance according to manufacturer's regulations
1.2 Dry air filter system
Activate dust removal valve
Check maintenance display
1.3 Replace filter element if maintenance display is red
2
Axles / power shift gear
2.1 Check oil level in front axle
2.2 Change oil in front axle
2.3 Check oil level in rear axle with
power shift gear
2.4 Change oil in rear axle with
power shift gear
2.5 Check oil level in planetary gear
2.6 Change oil in planetary gear
3
Axles / cardan shaft / articulated pendulum joint
3.1 Check fastening of axles (385 Nm)
3.2 Check fastening of cardan shaft (49 Nm)
4
Wheels and tyres
4.1 Check air pressure
4.2 Check fastening of wheel nuts (440 Nm)
5
Hydraulic system
5.1 Oil level check (view glass)
5.2 Oil change
5.3 Replace filter inserts, observe electr. control lamp
5.4 Check and clean hydraulic oil cooler
6
Lubrication points (indicated in red)
7
Battery
7.1 Visual check
8
Brake system
8.1 Service and parking brake:
Take function and visual check before starting work
8.2 Service brake: check brake lining, adjust if necessary
8.3 Service brake: visually check compensation tank
8.4 Parking brake: check brake lining, adjust if necessary
9
Lighting system / fresh air filter
9.1 Take function test before starting work
9.2 Check fresh air filter
*
*
*
*
*
*
*
GB
Key to symbols
First oil change, first filter replacement
or first check
Check; eliminate any determined problems
Change
The markings, filling and check plugs
are binding
Refer to operating instructions
Caution
When carrying out maintenance work, heed
the accident prevention regulations!
Lubrication points (indicated in red)
Lubricate glide points as required and always after cleaning
using grease DIN 51825 - KPF 1/2 N-20.
Oil lubrication points
Optional equipment: biodegradable hydraulic oil
Ester-based synthetic hydraulic oil,
viscosity class ISO VG 46 VI > 180
CAUTION
Use only mineral oil for the
service/parking brake
10 50 500
1500
Item
Every x operating hours
max. permissible intervals or
shorter (depending on use)
4102945A
Summary of Contents for AL 100t
