8-6
K65E/K75D/K95D/K95i
8-6
K65E/K75D/K95D/K95i
8.2.7
Changing the oil in
the front axle
(1)
Place a sufficiently large oil
drain pan underneath the axle.
(2)
Unscrew the plugs from the
axle arch (8-6/arrow and 8-7/arrow)
and drain the oil.
CAUTION
Waste oil must be disposed of in
such a way that it will not cause
pollution!
(3)
Screw in the plug (8-6/arrow)
again.
(4)
Fill in oil via the plug bore (8-7/
arrow) until the oil level reaches the
opening.
NOTE
- The vent valve of the axle (8-8/
arrow) must be free from dirt.
- Details regarding the amount of
oil required are given in the
maintenance plan (page 8-1).
- After a few minutes, when the oil
level has lowered, top up the oil
until the oil level reaches the
marked level and remains stable.
(5)
Screw in the plug (8-7/arrow)
again.
Figure 8-6
Figure 8-7
Figure 8-8
8.2.7 Changing the oil in
the front axle
(1)
Place a sufficiently large oil
drain pan underneath the axle.
(2)
Unscrew the plugs from the
axle arch (8-6/arrow and 8-7/arrow)
and drain the oil.
CAUTION
Waste oil must be disposed of in
such a way that it will not cause
pollution!
(3)
Screw in the plug (8-6/arrow)
again.
(4)
Fill in oil via the plug bore (8-7/
arrow) until the oil level reaches the
opening.
NOTE
- The vent valve of the axle (8-8/
arrow) must be free from dirt.
- Details regarding the amount of
oil required are given in the
maintenance plan (page 8-1).
- After a few minutes, when the oil
level has lowered, top up the oil
until the oil level reaches the
marked level and remains stable.
(5)
Screw in the plug (8-7/arrow)
again.
Figure 8-6
Figure 8-7
Figure 8-8
Summary of Contents for AL 100t
