8-12
K65E/K75D/K95D/K95i
8-12
K65E/K75D/K95D/K95i
2
1
2
1
8.2.12 Changing the oil in
the hydraulic system
(1)
Place an oil drain pan (min.
capacity: 110 l) underneath the drain
point.
(2)
Unscrew the oil drain plug
(8-21/arrow) (size 8).
(3)
Drain the oil into the drain pan.
CAUTION
Waste oil must be disposed of in
such a way that it will not cause
pollution!
(4)
Screw in the oil drain plug
again.
(5)
Replace the hydraulic oil filter
insert (section 8.2.13).
(6)
Fill in oil into the filler neck
(8-22/1).
CAUTION
For those loaders which are fitted to
run with biodegradable hydraulic oil
(ester-based synthetic hydraulic oil
of viscosity class ISO VG 46 VI
> 180) - (designation can be found
on the hydraulic oil reservoir and on
the dashboard), only this type of oil
may be used for oil changes.
Mineral and biodegradable hydrau-
lic oils must never be mixed!
Biodegradable hydraulic oil must
be changed every 1000 operating
hours.
To switch from hydraulic oil based
on mineral oil to biodegradable hy-
draulic oil, conversion guidelines
VDMA 24 569 must be observed!
CAUTION
Use only mineral oil for the service/
parking brake
(7)
Check the oil level at the sight
glass (8-22/2).
(8)
Close the filling nozzle.
Figure 8-21
Figure 8-22
Figure 8-21
Figure 8-22
8.2.12 Changing the oil in
the hydraulic system
(1)
Place an oil drain pan (min.
capacity: 110 l) underneath the drain
point.
(2)
Unscrew the oil drain plug
(8-21/arrow) (size 8).
(3)
Drain the oil into the drain pan.
CAUTION
Waste oil must be disposed of in
such a way that it will not cause
pollution!
(4)
Screw in the oil drain plug
again.
(5)
Replace the hydraulic oil filter
insert (section 8.2.13).
(6)
Fill in oil into the filler neck
(8-22/1).
CAUTION
For those loaders which are fitted to
run with biodegradable hydraulic oil
(ester-based synthetic hydraulic oil
of viscosity class ISO VG 46 VI
> 180) - (designation can be found
on the hydraulic oil reservoir and on
the dashboard), only this type of oil
may be used for oil changes.
Mineral and biodegradable hydrau-
lic oils must never be mixed!
Biodegradable hydraulic oil must
be changed every 1000 operating
hours.
To switch from hydraulic oil based
on mineral oil to biodegradable hy-
draulic oil, conversion guidelines
VDMA 24 569 must be observed!
CAUTION
Use only mineral oil for the service/
parking brake
(7)
Check the oil level at the sight
glass (8-22/2).
(8)
Close the filling nozzle.
Summary of Contents for AL 100t
