9-2
K65E/K75D/K95D/K95i
9-2
K65E/K75D/K95D/K95i
Malfunction
Possible cause
Remedy
Defect in the drive
Filter is clogged
Replace the filter insert
and working
(section 8.2.13)
hydraulics
Lack of oil in the
Top up the oil
hydraulic oil reservoir
Electrical connections to
Connect according to
the axial piston pump are the wiring diagram
loose, disconnected or
or clean
oxidised
High-pressure valves are Clean
soiled
Defects in the
Parking brake does not
Check the setting; if
braking system
hold the loader
necessary, readjust *
Check whether the
electr. drive cut-off
is connected to the
brake lever
Heating/ventilation
Fuse in the fuse box is
Replace the fuse
has failed
defective
Hose couplings of
Increased pressure
Carefully loosen the
the attachments
resulting from influence
coupling at the hose
cannot be
of heat on the attachment end above the quick
connected
coupling; oil sprays off;
the excess pressure
drops. Tighten the
coupling
NOTE
Make sure that the
collected oil cannot
cause any pollution
Increased pressure in the
Stop the engine.
basic loader
Remove the pressure
in the lines by moving
the valve lever for the
auxiliary hydraulics
(4-12/1) back and forth
several times
Malfunction
Possible cause
Remedy
Defect in the drive
Filter is clogged
Replace the filter insert
and working
(section 8.2.13)
hydraulics
Lack of oil in the
Top up the oil
hydraulic oil reservoir
Electrical connections to
Connect according to
the axial piston pump are the wiring diagram
loose, disconnected or
or clean
oxidised
High-pressure valves are Clean
soiled
Defects in the
Parking brake does not
Check the setting; if
braking system
hold the loader
necessary, readjust *
Check whether the
electr. drive cut-off
is connected to the
brake lever
Heating/ventilation
Fuse in the fuse box is
Replace the fuse
has failed
defective
Hose couplings of
Increased pressure
Carefully loosen the
the attachments
resulting from influence
coupling at the hose
cannot be
of heat on the attachment end above the quick
connected
coupling; oil sprays off;
the excess pressure
drops. Tighten the
coupling
NOTE
Make sure that the
collected oil cannot
cause any pollution
Increased pressure in the
Stop the engine.
basic loader
Remove the pressure
in the lines by moving
the valve lever for the
auxiliary hydraulics
(4-12/1) back and forth
several times
Summary of Contents for AL 100t
