1-8
K65E/K75D/K95D/K95i
1-8
K65E/K75D/K95D/K95i
1.5.1.20
Should the driver’s sight
of his driving and working area be
restricted due to work-induced
influences, he must be given
guidance or he must safeguard the
working area by a firm barrier.
1.5.1.21
The person giving
guidance must be a reliable person
and must be informed about his
tasks before commencement of
the work.
1.5.1.22
The driver and guide must
agree on signals for commu-
nication. These signals may only
be given by the driver and guide.
1.5.1.23
The guide must be easily
recognizable e.g. by wearing
warning clothing and must always
be in the driver’s field of vision.
1.5.1.24
When passing subways,
bridges, tunnels, electrical over-
head lines make sure that there is
adequate clearance!
1.5.1.25
Keep good clearance
when working at the edge of
quarries, pits, rubbish dumps and
embankments to eliminate any
danger of the machine plunging
down. The contractor or his deputy
must stipulate the distance from
the edge taking the soil bearing
capacity into consideration.
1.5.1.26
The machine may only
be used at stationary dumping areas
when firmly integrated installation
are provided to prevent the machine
from running or sliding down.
1.5.1.20
Should the driver’s sight
of his driving and working area be
restricted due to work-induced
influences, he must be given
guidance or he must safeguard the
working area by a firm barrier.
1.5.1.21
The person giving
guidance must be a reliable person
and must be informed about his
tasks before commencement of
the work.
1.5.1.22
The driver and guide must
agree on signals for commu-
nication. These signals may only
be given by the driver and guide.
1.5.1.23
The guide must be easily
recognizable e.g. by wearing
warning clothing and must always
be in the driver’s field of vision.
1.5.1.24
When passing subways,
bridges, tunnels, electrical over-
head lines make sure that there is
adequate clearance!
1.5.1.25
Keep good clearance
when working at the edge of
quarries, pits, rubbish dumps and
embankments to eliminate any
danger of the machine plunging
down. The contractor or his deputy
must stipulate the distance from
the edge taking the soil bearing
capacity into consideration.
1.5.1.26
The machine may only
be used at stationary dumping areas
when firmly integrated installation
are provided to prevent the machine
from running or sliding down.
Summary of Contents for AL 100t
