25
GB
Stage 6
Use chocks and chains to immobilise the vehicle and equipment on the trailer.
Stage 7
You should be aware of maximum headroom: measure the distance separating the ground
from the highest loader part.
Stage 5
Turn the rear view mirrors inwards and
make sure that the two doors and the
rear cab window are closed.
Stage 4
Insert the central articulated joint locking
pin (located on the right-hand side of
the joint). Then stop the engine and
disconnect key.
Stage 1
Lower the loader bucket onto the ground and lock the loader controls inside the driver’s
cab by using the lock pin.
Stage 2
Insert the central articulated joint locking pin. Then stop the engine and disconnect key.
Stage 3
Use the 4 points indicated (2 front and 2 rear) with the appropriate stickers to lift the
machine.
Observe the machine user standards described in this chapter, any other use
must be considered forbidden unless you have prior authorisation from the
manufacturer.
LIFT