36
GB
12. Replace hydraulic oil filter
cartridge.
Change after the first 200 working hours
and then every 1,000 hours.
Remove the filter element (1) from the
filter body and replace it with a new one.
Check the lid gasket (2) for wear and
replace if necessary.
Wash the container with naphtha. Wait
until it is completely dry then insert the
new cartridge.
13. Check epicyclic reduction gear oil
Turn the wheel until the inscription “OIL
LEVEL” (on the reduction unit) is parallel
to the ground and the level-filler cap is
on the right position; remove the cap: Oil
should just be at the level of the hole.
Top up by introducing the oil via the filler
hole when this is in the upper position.
Note:
The level must be checked with the
vehicle perfectly horizontal.
every
200
working hours
15. Check transfer box oil
Check that the level reaches the plug as
shown in the picture. If necessary top up
via the same.
Note:
The level must be checked with the
vehicle perfectly horizontal and engine
off.
Front axle
Rear axle
14. Check differential oil
Check that the level reaches the plug as shown in the picture. If necessary top up via the
same.
Note
: The level must be checked with the vehicle perfectly horizontal.
