S150/S151/S152/Z152
1-10
1
Safety regulations
1.6.1.3
In the case of sparking over any work or move-
ment must stop. Instructions to be followed:
bring the machine out of the danger area by lifting or
lowering the attachments or by swiveling away or driving
the machine out of the area. If this is not possible then the
following rules must be observed:
- do not leave the driver’s cabin!
- Warn persons standing near the machine not to approach
or touch the machine!
- Give immediate instructions to have the power cut off!
- Leave the machine only when it is sure that the electricity
in the damaged/contacted power line is switched off so
that the line is dead!
1.6.1.4
Work on the electrical system or on the operating
system may only be carried out by a skilled electrician or
by personnel instructed or supervised by such trained
electrician according to electrotechnical regulations.
1.6.1.5
The electrical installation of a machine must be
reviewed/inspected at regular intervals. Any defects, e.g.
loose connections or scorched cabling, must be eliminated
immediately.
1.6.1.6
Always de-energise machine or system parts to
be inspected, maintained or repaired by disconnecting the
battery main switch.
1.6.1.7
Always disconnect the battery main switch be-
fore starting any electrical welding on the machine.
1.6.2
Hydraulic systems
1.6.2.1
Only experts may carry out work on the hydraulic
system.
1.6.2.2
All pipelines, hoses and screw connections must
be checked regularly for leakages and visible damages.
Immediately eliminate such defects. Spurting hydraulic oil
may cause injuries and fire.
1.6.2.3
Those hydraulic system segments which are to
be opened must be made free of pressure before
commencement of the repair work according to the
assembly group description.
1.6.2.4
The hydraulic pipelines must be correctly laid and
connected. Do not get the connections mixed up. The
spare parts must be in an accordance with the technical
requirements stipulated by the manufacturer. This is, of
course, guaranteed when original spare parts are ordered.
1.6.2.5
Never change factory settings for hydraulic com-
ponents (such as the maximum permissible speed for the
axial piston engine). Changing such settings will cause the
warranty to become void.
1.6.3
Noise
Sound protection equipment must be in protective position
during operation of the machine.
Summary of Contents for AS 150
