S150/S151/S152/Z152
5-9
Operations
5
5.3
Stopping loader operations
5.3.1 Parking the loader
(1) Stop the vehicle on firm and preferably level ground.
(2) Apply the parking brake (4-7/4).
(3) Lower the bucket or front-loaded attachment to the
ground.
(4) Set the drive switch (4-7/3) to “0”.
DANGER
If parking on a slope or gradient cannot be
avoided, wheel chocks must be used and placed
on the sloping side of the front axle wheels
in
addition to
applying the parking brake.
5.3.2 Switching off the diesel engine
ATTENTION
If the diesel engine is very hot, it is a good idea to
let the engine idle for a short time before switching
it off.
Turn the ignition key to the left to the “0” position (5-1) and
remove the key.
NOTE
In the “P” position, the parking light and the
dashboard illumination remain switched on.
5.3.3
Switching off the heating and
ventilation unit / air-conditioning (opt.)
(1) Shut off the warm air supply (5-6/2).
(2) Turn the dial for the fan (5-6/4) to the "0" position.
(3) Switch off the air-conditioning unit (opt.) (5-6/3).
5.3.4 Leaving the loader
(1) Lock the hand levers for the working and auxiliary
hydraulics (1-2/1 and 1-2/2).
(2) Remove the main battery switch (4-7/5).
NOTE
If you will not be using the vehicle for a while,
follow the steps outlined in Chapter 3 (Anti-Theft
Protection).
(3) Remove the ignition key and lock the doors.
i
i
Summary of Contents for AS 150
