S150/S151/S152/Z152
8-4
8
Maintenance
8.2
Maintenance Tasks
8.2.1 Check engine oil fill-level
See the operating manual for the engine.
8.2.2 Check axle oil fill-level
8.2.2.1 Rear axle
(1) Remove the plugs from the axle arches (8-1/arrow)
and/or (8-2/arrow).
NOTE
-
The oil level must reach the plug bore.
-
Collect any escaping oil.
(2) Replace the plugs.
8.2.2.2 Planetary Gear
(1) Move the loader until the “OIL LEVEL” mark is horizontal
and the plug is located at the top right of the mark
(8-3/arrow).
(2) Remove the plug.
NOTE
-
The oil level must reach the plug bore.
-
Collect any escaping oil.
(3) Fit a new gasket and re-insert the plug.
Fig. 8-1
Fig. 8-3
Fig. 8-2
i
i
Summary of Contents for AS 150
