S150/S151/S152/Z152
8-9
Maintenance
8
1
2
3
4
8.2.7.3 Front axle
(1) Place a sufficiently large oil spill tray underneath the
vehicle.
(2) Remove plugs from axle arches (8-16/1, 8-16/2,
8-16/3, 8-16/4, and 8-17/Pfeil) and drain oil.
ATTENTION
Dispose of waste oil in an environmentally friendly
way!
(3) Re-insert plugs (8-16/1, 8-16/2, and 8-16/3).
(4) Top up with oil via axle arch plug bore (8-16/4 or
8-17/arrow) until oil fill-level reaches plug bore.
NOTE
-
Refer to the maintenance plan (pages 8-1and
8-2) for details on required amounts.
-
The oil fill-level will drop after a few minutes.
Top up with oil, until the required level has
been reached and remains constant.
-
The axle vent valve (8-18/arrow) must be free
of contamination.
(5) Re-insert plugs (8-16/4 and 8-17/arrow).
Fig. 8-16
Fig. 8-18
Fig. 8-17
i
Summary of Contents for AS 150
