Page 6 of 17
OPERATING INSTRUCTIONS
1. What work steps are to be performed?
-
Integration of the dosing device into the work process
-
Mounting of the nozzle holders on the mixing screw
-
Power supply of the device
-
Measurement of the grain moisture
-
Determination of the required acid quantity (in kg/100 kg of grain)
-
Determination of the grain screw
'
s conveying capacity (in t/h)
-
Determination of the acid quantity to be injected (in kg/h)
-
Selection of the nozzle size and the pressure
-
Adjustment of the required pump pressure
-
Functionality and tightness checks
-
Connection of the dosing device to the acid tank
-
Activation of the equipment combination and monitoring during
operation
2. Integration of the dosing device into the work
process
The device can be integrated into all common work processes in the
area of feed grain storage (conveyor screw or trough conveyor). The
dosing device uses at least 2 dosing nozzles (or 3 nozzles in case of
grain maize) to add the preservative at the respective starting points of
conveyor screws with a minimum length of 3 m.
From a conveying capacity of 50 t/h, it is necessary to use 3 nozzles (or
4 nozzles in case of grain maize) for the preservation of grain maize or
grain.
It is imperative to add the preservative via a screw conveyor.
After that, the grain may be transported with any means of conveyance
(conveyor belt, elevator, blower).
