3
58
AhnLab TrusGuard Installation Guide
PPPoE Port – For IPv4
This is used when PPPoE-based ISP line is used. This is the most appropriate method to connect
TrusGuard to the Internet in small-scale network with no static IP address.
Set PPPoE Port
Set the PPPoE settings as below. Use the default settings for any fields that have been left out.
1
Select the network port to use xDSL, and click
.
2
Specify the settings as below.
•
Select
Enable
(
).
•
Select
PPPoE
for
Type
.
▪
Enter the PPPoE subscriber's
ID
.
▪
Enter the PPPoE subscriber's
Password
.
•
Select the response protocol in
Control
.
