9
When using tools some safety precautions must be observed to prevent injuries
and damage. Therefore read through the operating manual/ safety instructions
carefully. Store them in a safe place so that the information is available to you at
all times. If you should hand the appliance on to other persons please hand
these operating instructions/safety instructions out with them. We do not
assume any liability for accident or damage which do not arise due to the failure
to observe these instructions and the safety instructions.
Safety directions
• Keep these operating directions ready to hand. You can then read up on important
information and instructions if necessary.
• Before start-up, check to ensure that the compressed-air tool is complete, func-
tional and free of leaks.
• Never put a defective or inoperative device into operation. Contact your specialist
dealer or have the device inspected by a qualified skilled worker.
• Disconnect the compressed-air tool from the compressor before replacing acces-
sories or an attachment. Also disconnect the device from the compressor if not in
use.
• Always work with the necessary levels of care.
• Do not apply unnecessary force under any circumstances.
• Always wear appropriate protective clothing when performing all work with the
impact screwdriver such as: protective gloves, work boots, protective goggles,
hearing protection etc. Persons in the immediate working area should take the same
protective measures.
• Make sure that the connection air pressure is not set at too high a level.
• Take the influence of anything in the vicinity into account! Make sure the work-
place is well illuminated.
• Always disconnect the device from the supply of compressed air before any re-
pair or servicing work.
• Faulty repairs can lead to injuries.
• Never exceed the permitted working pressure levels. Pressure levels that are too
high can damage the device and lead to injuries.
• Keep pneumatic tools away from children. This device can lead to injuries if used
incorrectly.
• Only connect it to the pneumatic air supply via a quick action coupling so it can
be quickly disconnected in the event of danger.
• Ensure that your hair does not get caught up in the rotating tool. Wear a hear net
for your safety.
• Wear close-fitting clothing. Wide-fitting, loose items of clothing get caught up in the
rotating tool and thus lead to injuries.
1231681_ BDA_ProfiAir_DNE_1_DL_Nadelentroster.indd 9
21.07.16 12:47
Summary of Contents for ProfiAir DNE 1
