347345_1116 29
AHT Cooling Systems GmbH
∙
Set-up, installation and commissioning, upkeep (maintenance, service and repair).
∙
Only qualified specialists who are trained to handle flammable refrigerants are permitted to
carry out work on the refrigerant circuit of R-290 appliances.
∙
Only qualified electricians are permitted to work on the electrical system.
Only AHT-authorised and trained cleaning companies are permitted to carry out the main cleaning
tasks (see
➙
Chapter 10.1.3).
Persons (including children) with limited physical, sensory or mental abilities are permitted to oper
-
ate the appliance only under supervision and after instruction, but they are not permitted to carry
out any maintenance work. Children should not play with the appliance.
Working on the appliance under the influence of drugs and alcohol is forbidden.
1.5 Personal protection equipment
WEAr HAND PrOtEctiON
▶ To protect your hands from sharp appliance edges when cleaning and performing
other maintenance work.
▶ To protect your hands from sharp edges and heavy appliance components during
unpacking, set up and installation.
▶ To protect your hands from sharp edges and rotating parts during maintenance
service and repair work.
▶
To remove glass parts and components in case of breakage.
▶ To prevent your hands from contacting liquid refrigerant in case of leaks in the refrig
-
erant circuit.
▶ When loading frozen food products.
uSE EyE PrOtEctiON
▶ To protect your eyes from coming into contact with liquid refrigerant in case of leaks
in the refrigerant circuit.
WEAr PrOtEctiVE clOtHiNG
▶ Wear the appropriate clothing (cold protection) when loading the appliance with
products.
1.6
Specific risks
1.6.1 Voltage
Only specialist personnel are permitted to carry out work on the electrical system. Contact mainte
-
nance services in case of error messages or damage to the appliance (see
➙
Chapter 10.4).
WArNiNG
contact with any parts carrying live voltage can cause an electric shock. risk of
fire due to sparks or overload
▶
Do
not connect a damaged appliance or damaged parts (for example, damaged
network connection cables) to the electric circuit.
▶ Inspect the safety equipment for completeness and functionality.
▶ Do not remove any safety guards or covers attached to the appliance.
▶ Observe the following before connecting to the power supply:
-
The applicable local electrical safety provisions
-
The applicable standards and safety instructions.
-
Specifications on the rating plate (see
➙
Chapter 2.2.1).
▶ If the device is damaged during operation and prior to maintenance, observe the
following safety rules:
1. Disconnect the appliance (switch off on all poles and on all sides).
2. Safeguard the appliance against unintentional restart.
▶ Exchange of damaged parts performed by specialist personnel only, for example:
-
Network connection cables
-
Lamps (see
➙
Chapter 10.2.2)
- Batteries (see
➙
Chapter 10.2.3)
▶ Do not remove any safety guards or covers attached to the appliance.
![FRIGOGLASS ICM2000 [R290] User Manual preview](http://thumbs.mh-extra.com/thumbs/frigoglass/icm2000-r290/icm2000-r290_user-manual_2338092-01.webp)
