347345_1116 39
AHT Cooling Systems GmbH
After inserting the power plug, and where present by ad-
ditionally closing the on/off switch (see
➙
Chapter 7.1), the
cooling unit begins to work after a short delay of approxi-
mately 2 minutes.
9. Operation
Only trained operating personnel are permitted to operate
the appliance.
WArNiNG
Damage to the electrical system and/or the
refrigerant circuit during operation. con-
tact with any parts carrying live voltage can
cause an electric shock. refrigerant can
escape and cause an explosive gas/air mix-
ture.
Risk of fi re due to sparks or overload.
1. Disconnect the appliance.
2. Safeguard the appliance against uninten-
tional restart.
▶
Avoid violent impacts to the appliance’s
exterior; for example, due to careless
operation with a lift truck or fl oor cleaning
machine.
▶
Avoid the transmission of pulsations and
vibrations to the appliance.
▶ Observe the safety instructions and warn-
ings for appliances with fl ammable refriger-
ants (see
➙
Chapter 1.6.2.1).
▶ Contact maintenance services (see
➙
Chapter 10.4).
cAutiON
Risk of glass breakage, cutting injuries on the body
▶ Pay attention to open passageways when the glass
doors are open.
▶
Do not place loads on the glass doors.
▶ Do not push a shopping trolley against a glass door
that is opened or closed.
▶ The glass doors must be closed immediately after
the customer removes a product.
NOTICE
∙
Material damage
due to improper use.
▶ Operate the appliance in a stable operating loca-
tion.
▶ Only operate the appliance on the adjustable feet
provided.
▶ Inspect the appliance regularly to ensure it is in
perfect condition. Any damage must be repaired
immediately.
∙
Property damage
due to improper use.
▶ Operate the appliance in the climate class indicated
on the rating plate or the additional label (see
➙
Chapter 2.2.1 and 2.3).
▶
The ambient temperature must never fall below
16°C (60.8°F).
▶ Check the internal temperature (see
➙
Chapter
4.1).
▶ In the event of a power failure, the stored products
must be inspected by the operator (temperature
check).
▶ Regularly inspect the product space for foreign
objects. Products that have been stored improperly
must be removed immediately.
▶ Remove any food residue and loose packaging (see
➙
Chapter 10.1.1).
▶ Regularly check that the glass doors are closed.
Depending on the climatic conditions of the installation
room (e.g. high air humidity), condensation can form on the
appliance’s exterior or frost can form on the inside of the
appliance.
cAutiON
leaking of condensation from glass doors /
glass elements. risk of slipping.
▶ Check under and in front of the appliance for
the formation of puddles.
▶ Remove condensation with a soft, slightly
damp cotton cloth or paper towel.
9.1
Loading
The products are accessed from the front. Only load the
appliance with products when the temperature stipulated
for the respective product has been reached. Check the
temperature on the internal thermometer (see
➙
Chapter
4.1, Fig. 2).
cAutiON
Breakage of glass doors. Glass breakage. cutting
injuries on the body.
▶ Pay attention to open passageways when the glass
doors are open.
▶
Do not place loads on the glass doors.
▶ Do not push a shopping trolley against a glass door
that is opened or closed.
▶ Close the glass doors immediately after loading.
cAutiON
improper assembly of the shelves / display
racks. Risk of injury due to falling shelves /
display racks loaded with products.
▶ Shelves / display racks must be snapped
into place in the provided openings.
Entering the appliance area. Cutting injuries
caused by material breakage. risk of fall-
ing. risk of impact due to the possibility of
products falling.
▶
Do not climb on top of or into the appliance
when loading it.
Falling objects. Impact injuries. Cutting
injuries caused by glass breakage.
▶ Do not place objects on top of the appliance.
▶ It is prohibited to store glass containers in
freezers.
